Titanium Grade 3 Needle Tubes, Titanium Grade 3 Needle Tube Manufacturer,Titanium Grade 3 Needle Tube Supplier, Titanium Grade 3 Needle Tube Exporter,Titanium Grade 3 Precision Tubing, Titanium Grade 3 Small Diameter Tube ,Titanium Grade 3 Needle Tubes
Sumer Metal Industries Private Limited is a recognized manufacturer, supplier and exporter of precision Titanium Grade 3 Needle Tubes used across medical, chemical, marine and industrial applications. These tubes are produced from commercially-pure (CP) Titanium Grade 3 (UNS R50550) which delivers higher strength than Grades 1 and 2 while retaining excellent corrosion resistance and weldability—making them ideal for demanding needle/tubing applications and heat-exchanger or process lines where fine, precise tubing is required.
The manufacturing process at Sumer Metal Industries emphasizes tight dimensional tolerances, smooth inside finishes and controlled cold-drawing operations to produce seamless and welded needle tubes suitable for high-precision assembly (for example in medical needles, sampling lines and fine instrumentation). Production capability typically includes very small outside diameters and thin walls with consistent ovality control, plus finishing options such as annealing and passivation for enhanced surface quality and corrosion performance.
Sumer Metal Industries exports Titanium Grade 3 needle tubes to markets across the Middle East (Oman, Qatar, Saudi Arabia, the UAE, Kuwait), Europe (Spain, Germany), North America (USA, Canada) and multiple regions in Africa. Their export service includes full documentation (mill test reports, chemical and mechanical test certificates per ASTM/JIS/EN standards), packing for sea/air shipment and compliance support for customs and end-use certification.
Titanium Grade 3 is commonly specified for applications requiring a balance of strength and corrosion resistance — for example seawater handling, chemical process tubing, condenser/heat-exchanger tubing and certain medical device components. Compared with Grades 1 and 2, Grade 3 provides a useful step-up in yield and tensile strength while remaining “commercially pure” titanium (i.e., not heavily alloyed), which simplifies joining and fabrication operations.
Specification of Titanium Grade 3 Needle Tubes
| Attribute | Specification / Notes |
|---|---|
| Material | Titanium Grade 3 (Commercially Pure, CP Ti Grade 3) |
| UNS / Designation | UNS R50550 (commonly referenced as Ti Gr.3) |
| Typical Standards | ASTM B338 / ASTM B861 (tubing families), AMS/EN/JIS equivalents available on request |
| Forms Available | Seamless & welded needle/precision tubes, cold-drawn, annealed and bright-drawn finishes |
| Outside Diameter (OD) | Typical range: 0.40 mm → 6.00 mm (custom sizes produced to order) |
| Wall Thickness (WT) | Typical range: 0.06 mm → 0.60 mm (or as per customer drawing) |
| Inner Diameter (ID) | Calculated from OD − 2×WT; custom ID tolerances available |
| Dimensional Tolerances | Standard: ±0.01 mm for OD (depends on size). Ovality controlled to customer / standard requirements |
| Surface Finish | Typical internal/external finish: Ra ≤ 0.8 µm (custom polishing / electropolish available) |
| Chemical Composition (summary) | Ti — balance; O ≤ 0.35% max; Fe ≤ 0.30% max; C ≤ 0.08% max; N ≤ 0.05% max; H ≤ 0.015% max (per spec) |
| Mechanical Properties (annealed, typical) | Tensile strength (Rm): ~450–580 MPa; Yield (0.2%): ~345–520 MPa; Elongation: ≥18% (varies by temper & standard) |
| Density | ≈ 4.51 g/cm³ |
| Modulus of Elasticity | ≈ 100–105 GPa |
| Operating Temperature | Serviceable up to ~400°C (dependent on application and environment) |
| Typical Applications | Medical needles & instrumentation, chemical process tubing, heat exchangers, seawater systems, precision instrumentation |
| Testing & QC | Material certificates (MTRs), chemical & mechanical test reports, dimensional inspection, non-destructive testing on request |
| Packaging & Export | Export packing for air/sea, wooden crates/coil packaging, individual tube protection; export to Middle East, Europe, North America, Africa (customs docs & certificates included) |
| Manufacturer / Supplier | Sumer Metal Industries Private Limited — Manufacturer, Supplier & Exporter |
| Notes / Customization | Custom OD/WT, tolerances, surface finishes, end-cutting, deburring, testing & special documentation available per order |
Quality control at Sumer Metal Industries typically includes incoming-material spectrochemical verification, non-destructive testing where required, dimensional inspection using calibrated gauges and final MTRs (mill test reports) tied to each shipment. The company can supply tubes per common standards (ASTM B338 / B861 / B863 families for tubing and bar/forging inputs) and can customize batches to customer drawing tolerances and finish requirements.
Chemical Composition of Titanium Grade 3 Needle Tubes
| Element | Maximum / Typical Content (% by weight) |
|---|---|
| Titanium (Ti) | Balance |
| Oxygen (O) | ≤ 0.35% |
| Iron (Fe) | ≤ 0.30% |
| Carbon (C) | ≤ 0.08% |
| Nitrogen (N) | ≤ 0.05% |
| Hydrogen (H) | ≤ 0.015% |
| Other elements (each) | ≤ 0.10% |
| Other elements (total) | ≤ 0.40% |
With a proven track record as a Titanium Grade 3 Needle Tubes exporter in over 30 countries, Sumer Metal Industries ensures global availability, third-party inspection support, and client-specific customization. Our wide export network combined with strict quality standards has made us a preferred choice for SS Grade3 tubing worldwide.
Specification of Titanium Grade 3 Needle Tubes
| Attribute | Specification / Notes |
|---|---|
| Material | Titanium Grade 3 (Commercially Pure, CP Ti Grade 3) |
| UNS / Designation | UNS R50550 (commonly referenced as Ti Gr.3) |
| Typical Standards | ASTM B338 / ASTM B861 (tubing families), AMS/EN/JIS equivalents available on request |
| Forms Available | Seamless & welded needle/precision tubes, cold-drawn, annealed and bright-drawn finishes |
| Outside Diameter (OD) | Typical range: 0.40 mm → 6.00 mm (custom sizes produced to order) |
| Wall Thickness (WT) | Typical range: 0.06 mm → 0.60 mm (or as per customer drawing) |
| Inner Diameter (ID) | Calculated from OD − 2×WT; custom ID tolerances available |
| Dimensional Tolerances | Standard: ±0.01 mm for OD (depends on size). Ovality controlled to customer / standard requirements |
| Surface Finish | Typical internal/external finish: Ra ≤ 0.8 µm (custom polishing / electropolish available) |
| Chemical Composition (summary) | Ti — balance; O ≤ 0.35% max; Fe ≤ 0.30% max; C ≤ 0.08% max; N ≤ 0.05% max; H ≤ 0.015% max (per spec) |
| Mechanical Properties (annealed, typical) | Tensile strength (Rm): ~450–580 MPa; Yield (0.2%): ~345–520 MPa; Elongation: ≥18% (varies by temper & standard) |
| Density | ≈ 4.51 g/cm³ |
| Modulus of Elasticity | ≈ 100–105 GPa |
| Operating Temperature | Serviceable up to ~400°C (dependent on application and environment) |
| Typical Applications | Medical needles & instrumentation, chemical process tubing, heat exchangers, seawater systems, precision instrumentation |
| Testing & QC | Material certificates (MTRs), chemical & mechanical test reports, dimensional inspection, non-destructive testing on request |
| Packaging & Export | Export packing for air/sea, wooden crates/coil packaging, individual tube protection; export to Middle East, Europe, North America, Africa (customs docs & certificates included) |
| Manufacturer / Supplier | Sumer Metal Industries Private Limited — Manufacturer, Supplier & Exporter |
| Notes / Customization | Custom OD/WT, tolerances, surface finishes, end-cutting, deburring, testing & special documentation available per order |
🏭 Industry & Application
- ✅ Titanium Grade3 Needle Tubes for Medical Industry
- ✅ Titanium Grade3 Needle Tubes for Chemical Processing
- ✅ Titanium Grade3 Tubes for Needle Lines
- ✅ Titanium Grade 3 Needle Tubes for Gas & Liquid Flow
- ✅ Titanium Grade3 Tubes for Heat Exchangers
❓ Frequently Asked Questions (FAQs)
Q1: What makes Titanium Grade 3 needle tubes better for certain applications?
A1: Titanium Grade 3 offers a higher strength than Grades 1 and 2 while maintaining excellent corrosion resistance and weldability. This balance makes it ideal for precision tubing in corrosive or load-bearing environments such as chemical process lines, heat exchangers and some medical instrument components.
Q2: What product documentation and certifications are provided with exports?
A2: Sumer Metal Industries supplies full mill test reports (MTRs), chemical and mechanical test certificates (to ASTM/EN/JIS as required), packing lists and compliance documents needed for export clearance and end-use verification.
Q3: What on-page SEO elements should I use for a Titanium Grade 3 needle tube product page?
A3: Use a clear title (e.g., "Titanium Grade 3 Needle Tubes – UNS R50550 | Sumer Metal Industries"), a concise meta description (see the above meta name="description"), targeted keywords (as in meta name="keywords"), H1/H2 headers that include the product name and primary benefits (strength, corrosion resistance, export markets), and structured FAQ markup to improve chances of SERP rich results.
Titanium Grade 3 Needle Tubes exporter
Titanium Grade 3 Needle Tubes Exporter in Oman, Titanium Grade 3 Needle Tubes Supplier in Oman, Titanium Grade 3 Needle Tubes in Oman, Titanium Grade 3 Needle Tubes Exporter in Saudi Arabia, Titanium Grade 3 Needle Tubes Supplier in Saudi Arabia, Titanium Grade 3 Needle Tubes in Saudi Arabia, Titanium Grade 3 Needle Tubes Exporter in UAE, Titanium Grade 3 Needle Tubes Supplier in UAE, Titanium Grade 3 Needle Tubes in UAE, Titanium Grade 3 Needle Tubes Exporter in Qatar, Titanium Grade 3 Needle Tubes Supplier in Qatar, Titanium Grade 3 Needle Tubes in Qatar, Titanium Grade 3 Needle Tubes Exporter in Kuwait, Titanium Grade 3 Needle Tubes Supplier in Kuwait, Titanium Grade 3 Needle Tubes in Kuwait, Titanium Grade 3 Needle Tubes Exporter in Bahrain, Titanium Grade 3 Needle Tubes Supplier in Bahrain, Titanium Grade 3 Needle Tubes in Bahrain, Titanium Grade 3 Needle Tubes Exporter in Egypt, Titanium Grade 3 Needle Tubes Supplier in Egypt, Titanium Grade 3 Needle Tubes in Egypt, Titanium Grade 3 Needle Tubes Exporter in South Africa, Titanium Grade 3 Needle Tubes Supplier in South Africa, Titanium Grade 3 Needle Tubes in South Africa, Titanium Grade 3 Needle Tubes Exporter in Kenya, Titanium Grade 3 Needle Tubes Supplier in Kenya, Titanium Grade 3 Needle Tubes in Kenya, Titanium Grade 3 Needle Tubes Exporter in Nigeria, Titanium Grade 3 Needle Tubes Supplier in Nigeria, Titanium Grade 3 Needle Tubes in Nigeria, Titanium Grade 3 Needle Tubes Exporter in Spain, Titanium Grade 3 Needle Tubes Supplier in Spain, Titanium Grade 3 Needle Tubes in Spain, Titanium Grade 3 Needle Tubes Exporter in Germany, Titanium Grade 3 Needle Tubes Supplier in Germany, Titanium Grade 3 Needle Tubes in Germany, Titanium Grade 3 Needle Tubes Exporter in USA, Titanium Grade 3 Needle Tubes Supplier in USA, Titanium Grade 3 Needle Tubes in USA, Titanium Grade 3 Needle Tubes Exporter in Canada, Titanium Grade 3 Needle Tubes Supplier in Canada, Titanium Grade 3 Needle Tubes in Canada.
Categories
Countries We Export
At Sumer Metal Industries Pvt. Ltd., we follow a zero-defect policy by implementing stringent quality checks, using certified raw materials, and continuously improving our processes to deliver reliable and consistent tubing solutions
Read More